To insecure your belongings, it’s very important to register your fingerprints before using. (Make sure to take out the backup key and keep them safe)
1. Factory Setting
1-1. Any fingerprint can unlock the safe
1-2. Default code: 1-2-8-4
1-3. Chenge the passcode before registering new fingerprints
1-4. Take our the backup key and keep it properly
2. Change the Password
2-1. Scan any finger then open the drawer, press the setting button once
2-2. Enter the current password then enter # to confirm, the green light flashes
2-3. Enter the new password then # to confirm for twice
2-4. Light off, the password is changed successfully
Note:
◉The same steps to add more passwords, max 10 passwords
◉The first and second passwords are the master passwords. It’s used for unlocking and setting
◉Before using, please make sure to change the password and add at least 1 fingerprint
3. Register New Fingerprints
3-1. Scan any finger then open the drawer, press the setting button once
3-2. Enter the master password then enter # to confirm, the green light flashes
3-3. Scan your finger for 4 times at slightly different angles, each scan will be followed by yellow light flashing and beeping once
3-4. Light off, the new fingerprint is registered successfully
Note:
◉The same steps to register more fingerprints, max 40 fingerprints
◉To add at least 1 fingerprint to the lock to protect your belongings safe
◉Make sure the fingerprint works well it’s better add more than 3 fingerprints
4. System Initialization
4-1. Open the drawer by registered fingerprint or password
4-2. Press the setting button for 10 sec, holding. Then release until you hear "beep, beep"
4-3. Light off, the system is initialized
4-4. Any finger can unlock the drawer
Keywords: drawer safe
Originally published 15 Apr 2025, updated 15 Apr 2025.
